======初期設定======

=====SSH有効化=====
[RASPI-CONFIG]→[5 Interfacing Options]→[P2 SSH]→[YES]
参考) http://eagle0wl.hatenadiary.jp/entry/2016/09/06/225219


=====ユーザ設定=====
<code>
$ sudo su -
# passwd pi
# passwd root
# update-alternatives --config editor
# useradd -m -s /bin/bash -g users USER
# passwd USER
# visudo
pi ALL=(ALL) ALL
rpi ALL=(ALL) ALL
</code>

=====root ログイン制限=====
# vi /etc/ssh/sshd_config
<code>
#PermitRootLogin yes
PermitRootLogin no
</code>

=====ネットワーク設定=====
# vi /etc/resolv.conf
# vi /etc/network/interfaces
<code>
allow-hotplug wlan0
iface wlan0 inet manual
  wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
</code>

# vi /etc/wpa_supplicant/wpa_supplicant.conf

=====swap停止=====
# update-rc.d dphys-swapfile remove

=====bash設定=====

.bashrcの設定
<code bash bashrc>
export PATH=~/bin:${PATH}

# Language configuration
case $TERM in
    xterm*)
        export LANG="ja_JP.UTF-8"
        ;;
    *)
        export LANG="en_GB.UTF-8"
        ;;
esac

if [ -e /boot/nofsprotect ]
then
  echo "[fsprotect: writable]"
  PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\] \[\033[01;31m\][writable]\[\033[00m\] :\[\033[01;34m\]\w \$\[\033[00m\] '
else
  echo "[fsprotect: protected]"
  PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\] \[\033[01;30m\][protected]\[\033[00m\] :\[\033[01;34m\]\w \$\[\033[00m\] '
fi
</code>

.bas_aliasesの設定
<code bash bash_aliases>
alias lsa="\ls -lsAF --color=auto"
alias ls="\ls -lsF --color=auto"
alias l="\ls -lsFC --color=auto"
alias v="\less"
alias g="\grep"
alias c='clear'
</code>

=====rc.local有効化=====
# raspi-config
[Boot Options]→[Wait for Network at Boot] →[Yes]

参考) https://arakan60.com/?p=3075

メモ：
これでどのような表示がされる？
# systemctl status rc-local.service -l"

参考) https://www.raspberrypi.org/forums/viewtopic.php?f=66&t=122207

=====overlayfs=====
[[raspberry_pi:0060overlayfs]]

=====メンテ用スクリプト=====
・celeanlog
・maintenance_reboot

[[raspberry_pi:0090script]]

=====画面設定=====

# vi /boot/config.txt
<code>
#disable_overscan=1
</code>
<code>
hdmi_force_hotplug=1
</code>
<code>
framebuffer_width=320
framebuffer_height=240
</code>
<code>
hdmi_drive=2
</code>

<code>
dtparam=i2c_arm=on,spi=on
dtoverlay=pitft28-resistive,rotate=90,speed=48000000,fps=30
</code>

=====fbcp=====
https://github.com/howardqiao/zpod

# wget https://github.com/howardqiao/zpod/raw/master/zpod_res/fbcp
# chmod a+x fbcp
# cp /usr/local/bin
# vi /etc/rc.local
<code>
/usr/local/bin/fbcp&
</code>