差分

この文書の現在のバージョンと選択したバージョンの差分を表示します。

この比較画面にリンクする

両方とも前のリビジョン 前のリビジョン
次のリビジョン
前のリビジョン
raspberry_pi:0020network [2017/07/06 06:31]
admin
raspberry_pi:0020network [2017/07/13 12:15] (現在)
admin
ライン 6: ライン 6:
   # vi /​etc/​dhcp/​dhclient.conf   # vi /​etc/​dhcp/​dhclient.conf
   ----   ----
-  send dhcp-client-identifier=hardware; ​ (こちらは必須・スペース)+  send dhcp-client-identifier = hardware; ​ (こちらは必須・・・、かと思ったらくても動いていそう)
  
   # vi /​etc/​dhcpcd.conf   # vi /​etc/​dhcpcd.conf
ライン 12: ライン 12:
     send dhcp-client-identifier = hardware; ​ (こちらは必須ではないみたい)     send dhcp-client-identifier = hardware; ​ (こちらは必須ではないみたい)
     interface eth0     interface eth0
-    #static ip_address=192.168.1.52/​24 
-    #static routers=192.168.1.1 
-    #static domain_name_servers=192.168.1.1 
-    ​ 
     interface wlan0     interface wlan0
-    #static ip_address=192.168.1.62/​24 
-    #static routers=192.168.1.1 
-    #static domain_name_servers=192.168.1.1 
- 
  
   # vi /​etc/​network/​interfaces   # vi /​etc/​network/​interfaces
   ----   ----
-    ​#iface eth0 inet manual +    iface eth0 inet manual 
-    iface eth0 inet dhcp+    ​iface eth0 inet dhcp  ​(この行をmanualにしないとDHCPでアドレスが設定できない?​)
     ​     ​
     allow-hotplug wlan0     allow-hotplug wlan0
-    ​#iface wlan0 inet manual +    iface wlan0 inet manual 
-    iface wlan0 inet dhcp+    ​iface wlan0 inet dhcp
  
-===== 固定アドレス =====+  # sudo service dhcpcd reload 
 + 
 +(参考) iface等の意味について説明あり 
 + 
 +https://​www.debian.org/​doc/​manuals/​debian-reference/​ch05.ja.html#​_the_basic_syntax_of_etc_network_interfaces 
 + 
 +===== 固定アドレスで設定 ​=====
 アドレスを固定にする場合 アドレスを固定にする場合
  
 +  # vi /​etc/​network/​interfaces
 +  ----
 +  iface wlan0 inet manual
 +  iface eth1 inet manual
 +
 +固定アドレスはdhcpcd.confで設定する。
 +(/​etc/​network/​interfacesではできなくなった)
   # vi /​etc/​dhcpcd.conf   # vi /​etc/​dhcpcd.conf
   ----   ----
 +  send dhcp-client-identifier = hardware; ​ (こちらは必須ではないみたい)
   interface eth0   interface eth0
-    ​static ip_address=192.168.1.7/24 +  ​static ip_address=192.168.1.152/24 
-    static routers=192.168.1.1 +  ​static routers=192.168.1.30 
-    static domain_name_servers=192.168.1.1+  static domain_name_servers=192.168.1.1 
 +   
 +  interface wlan0 
 +  static ip_address=192.168.1.162/​24 
 +  ​static routers=192.168.1.1 
 +  static domain_name_servers=192.168.1.1
  
-(参考) http://​swiftlife.hatenablog.jp/​entry/​2016/​01/​10/​170249 +  ​sudo service dhcpcd reload
- +
-===== 固定アドレス(2) ===== +
-  ​vi /​etc/​network/​interfaces +
-  ---- +
-  # wlan0 +
-  iface wlan0 inet static +
-  address 192.168.20.1 +
-  netmask 255.255.255.0 +
-  gateway 192.168.20.1 +
-   +
-  # eth1 +
-  iface eth1 inet static +
-  address 192.168.21.1 +
-  netmask 255.255.255.0 +
-  gateway 192.168.21.1+
  
 +(参考) https://​hirooka.pro/?​p=8526
  
-===== 無線LAN===== +----------------------------------------------------------------------- 
-  # wpa_passphrase ​BBUser870201 XXXXXXXXXXXXXXXXXXX +===== 無線LAN ===== 
-  # sudo vi /​etc/​wpa_supplicant/​wpa_supplicant.conf +====パスフレーズ等の設定==== 
-  - +<​code>​ 
-   network={ +# cd /​etc/​wpa_supplicant 
-        ssid="BBUser870201"+ iwlist wlan0 scan|grep ESSID 
 +# wpa_passphrase ​SSID password 
 +# sudo vi wpa_supplicant.conf 
 +network={ 
 +        ssid="SSID"
         psk=xxxxxxxxxxx....................xxxxx         psk=xxxxxxxxxxx....................xxxxx
         proto=RSN         proto=RSN
ライン 70: ライン 71:
         pairwise=CCMP         pairwise=CCMP
         auth_alg=OPEN         auth_alg=OPEN
-   }+}
  
-  # ifconfig wlan0 down + # ​chmod 600 wpa_supplicant.conf 
-  # ​ifconfig wlan0 up +</​code>​ 
-  ​# ifconfig wlan0 +   
- +====interfaces設定==== 
-  # vi /​etc/​network/​interfaces +<​code>​ 
-  ​---- +# vi /​etc/​network/​interfaces 
-  # auto wlan0  <- 要否不明 +allow-hotplug wlan0 
-  ​allow-hotplug wlan0 +iface wlan0 inet manual
-  iface wlan0 inet dhcp <​-manuaでないとアドレスを取れないかも+
   wpa-conf /​etc/​wpa_supplicant/​wpa_supplicant.conf   wpa-conf /​etc/​wpa_supplicant/​wpa_supplicant.conf
- +  ​ 
-  vi /​etc/​dhcpcd.conf +ifconfig wlan0 down 
-  ---- +# ifconfig wlan0 up 
-  ​interface ​wlan0 +# ifconfig ​wlan0 
-  ​static ip_address=192.168.1.62/24 +</code>
-  static routers=192.168.1.1 +
-  static domain_name_servers=192.168.1.1+
  
  
 +省電力設定の例
   # vi /​etc/​modprobe.d/​8192cu.conf   # vi /​etc/​modprobe.d/​8192cu.conf
   ----   ----
   # Disable power saving   # Disable power saving
   options 8192cu rtw_power_mgnt=0 rtw_enusbss=1 rtw_ips_mode=1   options 8192cu rtw_power_mgnt=0 rtw_enusbss=1 rtw_ips_mode=1
- +  ​
-===== 無線LAN(2) ===== +
-hostapdを使わないならこの設定 +
- +
-  # vi /​etc/​network/​infterfaces +
-  ---- +
-  auto wlan0 +
-  allow-hotplug wlan0 +
-  iface wlan0 inet dhcp +
- ​ wpa-ssid [SSID] +
- ​ wpa-psk [PWD] +
- +
-※wpa_supplicant.confに書いても良い +
 ===== DNSサーバ指定 ===== ===== DNSサーバ指定 =====
   # vi /​etc/​resolv.conf   # vi /​etc/​resolv.conf
ライン 114: ライン 100:
     nameserver 8.8.8.8 (DNSサーバのIPアドレス)     nameserver 8.8.8.8 (DNSサーバのIPアドレス)
   # sudo /​etc/​init.d/​networking reload ​ (設定反映)   # sudo /​etc/​init.d/​networking reload ​ (設定反映)
- 
  
raspberry_pi/0020network.1499322680.txt.gz · 最終更新: 2017/07/06 06:31 by admin
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0